$649.00
- Description
24V motor builded-in controller single chainwheel kit ISIS/square tape BB
|
|
 |
 |
| Use the crank remover to remove the nut from the axle. |
 |
| Use the crank remover to remove the chain wheel and cranks |
 |
| Use crank remover to remove the chain wheel and cranks |
 |
| The distance between the rear wheel and the button bracket must be at least 60 mm |
 |
| Remove the nut from the button bracket |
 |
| Remove the Axle from the button bracket and replace it with the longer Axle. |
 |
| Put the motor’s mounting bracket on the bike frame. |
 |
| Put the motor on the mounting bracket |
 |
| Put the chain wheel on the freewheel crank then on the Axle. |
 |
| Add more chain on the original chain link ( approx.4 links) |
 |
| Tighten the cranks with the crank remover |
 |
| Put the chain over the motor’s sprocket and adjust the motor to the right height, make sure the nut is positioned in place ( CCW motor) |
 |
| Put the chain over the motor’s sprocket and adjust the motor to the right height, make sure the nut is positioned in place ( CW motor) |
 |
| Motor throttle on the right hand side |
 |
| Gear grip on the left hand side |
 |
| Plug the throttle plug in to the motor side controller plug |
 |
| Plug in the battery power cord to the motor’s power cord. |
 |
| Complete |
*BB width
Total
$649.00
* Qty